If you haven’t already, you should check out our ultimate guide to mixing like a pro.Īlright. Well, if you’re not mastering your tracks properly (or at all), this could well be the problem.īefore you learn all about mastering in Logic Pro X though, it’s important you get a few of the fundamentals right. Is your finished track missing that special something?Īre you finding your productions just aren’t quite hitting the mark when you compare them with your favourite beat-makers? Leave at least 1 second of blank audio at the start and end of the track to ensure no initial transients or reverb tails are missed on export.This post was most recently updated on April 9th, 2023 If you have put devices on the master please turn them off before bouncing.
Don’t worry if there is an occasional small peak over -6db.Įnsure that there are no active effects or devices on the master channel of your project. Mix-down the various levels of your track so that they are balanced and panned as you want them, leaving plenty head-room on the master channel.Įnsure the project has enough "head-room" - when you listen back, the master channel should be peaking around -6db, with the fader at 0db. These guidelines are written with Ableton Live in mind, however the principles remain the same irrespective of your DAW of choice. Please read these guidelines before submitting tracks for mastering. Check out our guide here for bouncing stems in preparation for mixdown. On a side-note before even considering mastering your should have a solid mix down in place. We offer this service if you don’t have the patience, monitoring equipment, or experience to be mastering your music yourself. This is a short but sweet explanation of the targets you should be aiming at when preparing your track to be sent for mastering. GUIDELINES FOR PREPARING YOUR TRACK FOR MASTERING
0 kommentar(er)
